Double Glazed Unit – 1000 × 800 mm

Cleaning & Maintenance

Your double-glazed unit requires minimal ongoing maintenance to deliver decades of reliable performance. Regular cleaning keeps glass looking its best and helps identify any issues early.

Routine Cleaning

Clean both faces of the sealed unit using warm water with a small amount of washing-up liquid and a soft, lint-free cloth or sponge. Avoid abrasive cleaners, scouring pads, or razor blades, which can damage coatings and seals. Rinse thoroughly with clean water and dry with a chamois or microfibre cloth to prevent water spots.

Seal & Spacer Bar Inspection

Inspect the perimeter seal every 6–12 months. Look for cracking, peeling, or gaps in the secondary sealant (typically black polysulphide or silicone). If you notice internal condensation between the panes, this indicates seal failure — contact Pane Relief for a warranty assessment.

Frame & Drainage

Keep drainage slots in the window frame clear of debris. Blocked drainage channels allow water to pool against the sealed unit edge, which accelerates seal degradation. A pipe cleaner or compressed air clears most blockages.

Installation Guide

Correct installation is critical to the long-term performance of your 1000 × 800mm sealed unit. These guidelines cover standard rebated-frame glazing — always refer to the frame manufacturer's instructions for system-specific requirements.

Preparation

Inspect the unit on delivery. Check for chips, cracks, or seal damage before removing protective film. Verify dimensions match the frame rebate with 3–5mm clearance on all sides. Ensure the frame rebate is clean, dry, and free from old putty or sealant residue.

Setting Blocks & Packers

Place two setting blocks (minimum 50mm wide) at the quarter points of the bottom rail — approximately 50mm from each corner. Use 5mm flat packers for side and top clearance. Setting blocks must be load-bearing nylon or HDPE, not timber, which can swell and crack the glass.

Glazing & Sealing

Apply a continuous bead of neutral-cure silicone sealant to the back of the glazing bead before pressing into position. Do not use acid-cure silicone, which attacks the spacer bar sealant. Ensure the glazing bead is fully seated with no gaps — water ingress behind the bead is the most common cause of premature seal failure.

Drainage

Verify that frame drainage slots (minimum two per unit, positioned at the lowest point of the rebate) are clear and functional. The sealed unit must never sit in standing water.

Size-Specific Notes

At 1000 × 800mm, this unit weighs approximately 20kg (24mm build-up) to 25kg (28mm build-up). A single installer can handle this weight, but a second pair of hands makes positioning easier and reduces the risk of dropping. Always use a glass suction lifter for safe handling.

10-Year Manufacturer's Warranty

Every double-glazed unit from Pane Relief is backed by our comprehensive 10-year manufacturer's warranty, covering seal integrity, gas retention, and coating performance. Our BS EN 1279-certified manufacturing process ensures each unit meets the highest quality standards.

The warranty covers: internal condensation caused by seal failure, visible coating degradation, and argon or krypton gas leakage beyond acceptable levels. Normal wear, external condensation (a sign the unit is working efficiently), and damage from incorrect installation or handling are excluded.

To make a claim, contact our Bristol team with your order reference and date of purchase. We aim to inspect and resolve all warranty claims within 14 working days. For installations carried out by FENSA-registered installers, we can process claims directly — no third-party paperwork required.