How long until my sealed unit ships?

Standard double-glazed units take 5–7 working days to make and dispatch. Triple-glazed, toughened and laminated units take 10–14 working days. We email you your delivery day the day before.

What warranty do you offer?

Every sealed unit carries a 10-year guarantee against seal failure (condensation between panes) and structural defects. Our fitting work and coatings (Low-E, self-cleaning, solar) are also guaranteed for 10 years. The guarantee covers the original buyer only and doesn't transfer to a new owner.

Are you FENSA registered?

Yes. Pane Relief is FENSA registered for installation work, installer number 43465. FENSA registration confirms our installations comply with Building Regulations Document L (energy efficiency).

What dimensions do I provide?

Measure the visible glass (not the frame), then add 25mm to the width and 25mm to the height, in millimetres.

Do you deliver UK-wide?

Yes, anywhere on mainland UK. Delivery is free to Bristol (BS) postcodes. Everywhere else on the UK mainland it costs £150 + VAT (£180), with no free-delivery threshold. The largest unit we deliver is 2900mm × 1500mm, with a £15 surcharge on any unit over 2000mm.

What postcodes do you cover for installation?

Bristol, Bath, North Somerset and South Gloucestershire, plus Gloucester and towns in Wiltshire and Somerset. Elsewhere on the UK mainland we supply units for you or your installer to fit.

What payment terms do you offer?

We don't offer 30-day credit terms.

Can I return a sealed unit if I measured wrong?

Made-to-measure sealed units can't be returned unless faulty or damaged. If you measured wrongly, we remake the unit and you pay the same price again. You can change or cancel free of charge until production starts. Please report any damage within 24 hours of delivery.

What's the difference between a sealed unit and replacement glass?

A sealed unit is a complete double-glazed assembly: two panes of glass bonded around a spacer bar with desiccant, with air or (as an upgrade) argon gas between the panes. Replacement glass is a single pane. If your unit is misted, you need a new sealed unit, not just glass.

Are your units BS EN 1279 compliant?

Yes. Every Pane Relief sealed unit is made by our partner factory to BS EN 1279, the European durability standard for insulated glass units. This covers gas concentration retention, edge seal integrity, and moisture penetration.

Yes. Apply for a trade account at panerelief.co.uk/pages/bulk-orders. Trade discounts are 5% at 5+ units, 10% at 20+ and 15% at 50+. We don't offer 30-day credit terms.

How do I measure a sealed unit?

Measure the visible glass face, width and height, in millimetres, then add 25mm to the width and 25mm to the height. That is your order size. Our measuring guide: panerelief.co.uk/pages/measuring-guide

What obscure glass patterns are available for sealed units?

We offer multiple patterns including Stippolyte, Cotswold, Autumn Leaves, and other decorative options in 4mm or 6mm thicknesses for double or triple glazed configurations.

What U-values can obscure privacy glass achieve?

With Low-E coating and argon gas fill, our obscure glass sealed units achieve U-values from 1.1 W/m²K, meeting current building regulations for energy efficient performance.

Can obscure glass be used in external doors and windows?

Yes, obscure glass is ideal for bathroom windows, front doors, and side panels where privacy is essential whilst maintaining natural light and meeting thermal requirements.

How do I order made to measure obscure glass units?

Simply provide exact measurements and specify your preferred pattern. We supply to your dimensions made in 5–7 working days (10–14 if toughened or laminated) and delivered across the UK mainland.

Obscure Privacy Glass

Name: Pane Relief
Address: 36 Saltmarsh Drive, Bristol, South West England, BS11 0NG, GB
Telephone: 0117 330 3057
Price range: ££
Rating: 4.4

Obscured glass for privacyMultiple patterns available

Replacement, upgrade and specialist glazing, made to your measurements and delivered across the UK

FENSA Registered BS EN 1279 10-Year Warranty

Trade pricing & bulk orders

No products found

Use fewer filters or remove all

Obscure glass uses textured patterns to block the view while still allowing daylight through — available in multiple levels of obscurity to suit your needs. Popular choices include Stippolyte, Cotswold and Arctic patterns, all available in our sealed unit range.

About Obscure Privacy Glass

Obscure privacy glass provides essential screening whilst maintaining natural light transmission. Our range includes popular patterns like Stippolyte, Cotswold, and Autumn Leaves in 4mm and 6mm thicknesses, configured as double or triple glazed sealed units for residential and commercial applications requiring discretion without darkness.

Each sealed unit incorporates Low-E coating and argon gas fill, delivering U-values as low as 1.1 W/m²K for energy efficient performance. Warm edge spacer bar technology minimises thermal bridging whilst maintaining structural integrity. All units comply with BS EN 1279 standards for long-term durability and thermal performance.

Every obscured glass unit is made to measure by our partner factory, ensuring perfect fit for your specific requirements. We guarantee quality craftsmanship with UK mainland delivery and comprehensive technical support throughout your project.

Frequently Asked Questions

What obscure glass patterns are available for sealed units?

We offer multiple patterns including Stippolyte, Cotswold, Autumn Leaves, and other decorative options in 4mm or 6mm thicknesses for double or triple glazed configurations.
What U-values can obscure privacy glass achieve?

With Low-E coating and argon gas fill, our obscure glass sealed units achieve U-values from 1.1 W/m²K, meeting current building regulations for energy efficient performance.
Can obscure glass be used in external doors and windows?

Yes, obscure glass is ideal for bathroom windows, front doors, and side panels where privacy is essential whilst maintaining natural light and meeting thermal requirements.
How do I order made to measure obscure glass units?

Simply provide exact measurements and specify your preferred pattern. We supply to your dimensions made in 5–7 working days (10–14 if toughened or laminated) and delivered across the UK mainland.

Need Help Choosing the Right Glass?

Our glazing experts are here to help you find the perfect solution

Get a Free Quote Call 0117 330 3057

Order special instructions

Discount

Obscure Privacy Glass

No products found

About Obscure Privacy Glass

Frequently Asked Questions

Recently Viewed